Another part of the build where the old adage Measure Twice cut ( or drill in this case) once applies. This needs to line up just right or it either won’t be useable when driving or it will be uncomfortable.
Started with the pedal box assembly
And then removed the two brake cylinders ( front and rear) so I could access the main pedal box frame
and then aligned the box in the chassis so I could check it provided sufficient clearance for my feet ( first sit in the car 🙂
Once that was done I marked up where to drill onto the newly fitted bulkhead for the 6 securing bolts and where I will need to drill through with my hole cutter for re-fitting the brake cylinders. After marking up drilled the 6 mounting holes and then used a hole saw to cut out the two clearances for the front and rear brake servos.
Once that was done I marked holes to drill on the feet of the pedal box brackets on the work bench and made the 5 bolt holes as needed for fitting.