Tags

, ,

I have seen a few other builders do this so i borrowed the idea from Dave’s (KnobbyMNR) very impressive blog and decided to do the same.

Ordered a couple of sheets of 2mm Aluminium Chequer plate, and then did the usual template, measure, cut , fit and rivet.  Finally i added a rubber strip to the front edge to ensure nothing sharp in the driver space.

Please with the finish 🙂

2016-09-04 11.22.372016-09-04 09.52.132016-09-04 10.25.38

2016-09-04 10.53.59